Surface treatment:
It can be applied on all substrates such as gypsum, lime or cement based fine render. Clean the surface then apply by roller a coat of CeboFix R, acrylic fixative, diluted with 20-30% water.

Application cycle DRAFT effect:
On the prepared surface apply CeboStrong with a stainless steel trowel in a non-uniform layer, continuously changing the direction of application; when the product is still fresh decorate the surface engraving the desired pattern with CeboSign specific tool (A/35). Prior to the complete drying of the product, smooth the surface with the trowel pressing lightly the parts in relief. Always remember to often change the working direction to create irregular areas. Wait until CeboStrong is completely dry (10-12 hours) and sandpaper the surface to remove all imperfections. Apply two coats of CeboStyle Antico in the desired colour with CeboSi 4” brush (A/27). The product must be dry between coats. When CeboStyle Antico is thoroughly dry, (about 6-8 hours), apply one coat of CeboIron with a stainless steel trowel, taking care to remove the excess product to enhance the areas in relief.

Application cycle FUSION effect:
On the prepared surface apply CeboStrong with a stainless steel trowel in a uniform layer and with a minimum thickness of 3 mm; decorate immediately the product with the special rag-stippling trowel (A/11). Decorate the surface in an irregular pattern. Prior to the complete drying of the product, smooth the surface with the trowel pressing lightly the parts in relief. Always remember to often change the working direction to create irregular areas. Wait until CeboStrong is completely dry (10-12 hours); if necessary sandpaper the surface to remove all imperfections. Apply two coats of CeboStyle Antico in the desired colour with CeboSi 4” brush (A/27). The product must be dry between coats. When CeboStyle Antico is thoroughly dry (6-8 hours) apply one coat of CeboIron with a stainless steel trowel, taking care to remove the excess product to enhance the areas in relief.

CeboStrong:
Water based acrylic coating for interiors. It has excellent filling properties and can be applied in medium/high thick layers to create special material effects in relief.

CeboStyle Antico:
Water based, washable, full hiding paint with a metallic finish.

CeboIron Grigio & Nero:
Water based acrylic semi-hiding finish, with micaceous and pearly pigments.