Application of CeboStyle Antico

Brushed Effect: apply the finish with the CeboStyle Antico Plafoncino available in the 3×7 – 3×10 formats or with the CeboSi Brush, proceeding with crossed brushstrokes and avoiding sharp squares. After 4-6 hours and in any case once the first coat has dried, apply the second coat in the same way.

Gradient Effect: apply the finish with the CeboStyle Antico Plafoncino or the CeboSi Brush, proceeding with crossed or vertical or horizontal or oblique brush strokes: after 3/4 m2, with the product still wet, go over the treated surface with the Rectangular or Polygonal Polycarbonate Trowel , following the previously created process. After 4-6 hours and in any case once the first coat has dried, apply the second coat in the same way.

Striated effect: apply the finish with the CeboStyle Antico Plafoncino, proceeding with vertical brushstrokes for a band of approximately 50 cm: then go over the treated surface using the CeboStyle Antico Plafoncino “coast” to better emphasize the design. After 4-6 hours and in any case once the first coat has dried, apply the second coat in the same way.

Surface treatment
Ensure that the substrates are perfectly clean, dry and uniform. In case of recently repaired walls, highly absorbent or chalky substrates, carefully clean the surface and apply a coat of priming fixative CeboFix M, by paintbrush, diluted 1:1 with water.

FondoPlus:
Water based, acrylic base coat with high covering properties and brilliant white. Carefully clean the substrate and apply one or two coats of product, with a short hair woollen roller, until the surface is entirely covered. Apply CeboStyle Antico when FondoPlus is completely dry.

CeboGliss: powder additive for interiors, based on laminated glitter. When added to CeboStyle Antico it gives the finish a sparkling appearance. The addition of CeboGliss must be done shortly before the application. The prepared mixed product must be applied within 6 days.