Preparation of the substrates:
In the presence of recent smoothing, new masonry, chalking or absorbent substrates, perform a perfect cleaning of the substrate and first apply the insulating fixative CeboFix M in one coat, with a brush, diluted 1: 1 with water.

Application cycle Pennellato effect on CeboQuarz:
CeboQuarz is a fine-grained quartz paint with excellent adhesion, coverage and resistance characteristics for outdoor use. CeboQuarz, colored in the same color as CeboSi Universal AS and diluted 10-15% with water, is applied with a short-haired roller, in one or two coats, until the substrate is completely covered. Once CeboQuarz has dried, apply CeboSi Universal AS with the CeboSi brush, available in 2½ and 4 inch sizes; spread the product with crossed brush strokes, avoiding sharp squares. To obtain a more uniform finish, a second coat of CeboSi

Application cycle Spatolato effect on CeboStrong:
Apply a coat of CeboFix R diluted 20-30% with water with a roller and wait for it to dry completely. Apply the first coat of CeboStrong with a steel trowel and carefully smooth the surface. Once the first coat has dried, apply CeboStrong with the same steel trowel and achieve the desired aesthetic effect by working with crossed and irregular strokes. Before complete drying, go over the surface in order to lightly flatten the parts in relief. If the product is too dry, moisten with nebulized water. When CeboStrong is completely dry, apply the first coat of CeboSi Universal AS diluted 10% with water; spread the product with a brush and, using a synthetic sponge, distribute it evenly on the surface. Once dry, apply the second coat in the same way.

Application cycle Crushed effect on CeboStrong:
Apply with a roller a coat of CeboFix R diluted 20-30% with water and wait for it to dry completely. Apply the first coat of CeboStrong with the Shark 3 steel trowel using the smooth parts and carefully smooth the surface. Once the first coat has dried, apply CeboStrong diagonally and in an even thickness, using the toothed side of the Shark 3 trowel; then smooth the product using the smooth sides of the same trowel. When the product is still wet, dab or scratch with the CeboSign tool in an irregular manner, always respecting the direction of processing. Before complete drying, smooth the surface with a steel trowel, lightly squeezing the parts in relief. If the product is too dry, moisten with nebulized water. When CeboStrong is completely dry, apply the first coat of CeboSi Universal AS diluted 10% with water; spread the product with a brush and, using a synthetic sponge, distribute it evenly on the surface. Once dry, apply the second coat in the same way.