Finiture Preziose & Effects

Cebosi Decoro

Acrylic, water based, washable decorative plaster for interiors, enriched by precious metallic pigments. It allows to create refined decorations, with special silver and gold reflections. CeboSi Decoro can be applied over all smooth and levelled surfaces. In case of application over rough substrates, repair the surface with a suitable levelling paste. CeboSi Decoro is presented in a selection of refined ready-to-use base colours: Argento, Oro Veneziano, Oro Zecchino which can also be coloured with CeboKit or with CCS tinting system.

Cebosi Decoro

Finiture Preziose & Effects

Surface treatment:
Warning: ensure that the substrates are perfectly clean, dry and uniform. In case of new or recently repaired walls, highly absorbent or chalky substrates, carefully clean the surface and apply a coat of priming fixative CeboFix M, by paintbrush, diluted 1:1 with water.

CeboSi Fondo:
Water based, acrylic, base coat, with a slightly rough texture. Apply CeboSi Fondo wIth a short pile roller, in one or two coats to reach a perfect cover of the surface. Apply CeboSi Decoro when CeboSi Fondo is perfectly dry.

Application cycle

Spatolato Effect:
on a previously prepared CeboSì Fondo surface, using a stainless steel or a plastic trowel, apply an adequate amount of CeboSi Decoro ensuring it is spread evenly. Once you get a smooth and uniform coverage of the primer, allow it to dry completely (4-6 hours). Once dry, apply the second coat by crossed trowel strokes.

Nuvolato Effect:
on a previously prepared CeboSì Fondo surface, using a stainless steel trowel, apply an adequate amount of CeboSi Decoro ensuring it is spread evenly. Once you get a smooth and uniform coverage of the primer, allow it to dry completely (4-6 hours). Once dry, apply the second coat for about 2-3 m2 at a time and, while the product is still wet, work the surface with circular movements using the appropriate plastic pad.