Interior support treatment:
In the presence of recent smoothing, chalking or absorbent substrates, perform a perfect cleaning of the substrate and first apply the insulating fixative CeboFix M in one coat, by brush, diluted 1: 1 with water.

Exterior support treatment:
After thorough cleaning of the substrate, apply CeboFix R, a pigmented water-based acrylic primer , containing quartz flour, diluted 20-30%, with a short-haired roller in one or two coats in order to even out the surface.

CeboIron Cromo application on FondoPlus (for interiors only):

Apply FondoPlus , diluted 10% with water , with a short-haired roller, in one or two coats, until the substrate is completely covered . Once dry , apply two coats of CeboIron Cromo with a 2½ or 4 inch CeboSi brush : work with crossed strokes, avoiding sharp squares. When the first coat is completely dry, apply the second coat in the same way.

CeboIron Cromo application on CeboFix R:

Apply CeboFix R, diluted 20-30% with water , with a short-haired roller in one or two coats in order to even out the surface. Once dry , apply two coats of CeboIron Cromo with a 2½ or 4 inch CeboSi brush : work with crossed brushstrokes, avoiding sharp squares. When the first coat is completely dry, apply the second coat in the same way.

CeboIron Cromo application on CeboStone:

On completely dry C and boFix R , apply a coat of CeboStone with a medium brush and work the product with crossed brush strokes in order to obtain an alternation of rustic and smoother areas. A complete drying of CeboStone , apply CeboIron Chromium in two coats with brush CeboSi 2½ inches or 4: working with crossed strokes, avoiding net riquadrature. When the first coat is dry, apply the second coat in the same way.

CeboIron Cromo application on CeboStrong – ONDA effect -:

On completely dry CeboFix R, apply the first coat of CeboStrong and carefully smooth the surface. Once the first coat has dried, apply CeboStrong vertically or horizontally in an even thickness, using the toothed side of the Shark 3 steel trowel ; then smooth the product using the smooth sides of the same trowel . With the product still wet, work the surface with the “Onda 4” PVC trowel (A / 56), following the chosen horizontal or vertical direction. Before complete drying, go over the surface in order to lightly flatten the parts in relief. If the product is too dry, moisten with nebulized water. When CeboStrong is completely dry , apply CeboIron Cromo in two coats with a 2½ or 4 inch CeboSi brush following the direction of the previously created design and blending with a synthetic sponge . When the first coat is completely dry, apply the second coat in the same way.

CeboIron Cromo application on CeboStrong – SBRECCIATO effect -:

On completely dry CeboFix R, apply the first coat of CeboStrong and carefully smooth the surface. For complete drying of the first hand to apply CeboStrong vertically or horizontally in a uniform thickness, using the notched side of the trowel steel Shark 3 ; then smooth the product using the smooth sides of the same trowel . With the product still wet, dab or scratch with the CeboSign tool (A / 35) in an irregular way, always respecting the direction of processing. Before complete drying, smooth the surface with a steel trowel , lightly squeezing the parts in relief. If the product is too dry, moisten with nebulized water . When CeboStrong is completely dry, apply CeboIron Cromo in two coats with a 2½ or 4 inch CeboSi brush following the direction of the previously created design and blending with a synthetic sponge. When the first coat is completely dry, apply the second coat in the same way.

CeboIron Chrome Application On CeboStrong – ZEFFIRO effect -:

On completely dry CeboFix R, apply the first coat of CeboStrong and carefully smooth the surface. Once the first coat has dried, apply CeboStrong vertically or horizontally in an even thickness, using the toothed side of the Shark 3 steel trowel ; then smooth the product using the smooth sides of the same trowel . When the product is still wet, scratch with the CeboSign tool (A / 35) always respecting the direction of processing. Before complete drying, smooth the surface with a steel trowel , lightly squeezing the parts in relief. If the product is too dry, moisten with nebulized water. When CeboStrong is completely dry , apply CeboIron Cromo in two coats with a 2½ or 4 inch CeboSi brush following the direction of the previously created design and blending with a synthetic sponge . When the first coat is completely dry, apply the second coat in the same way.

CeboIron Cromo application on CeboStrong – SPATOLATO effect – :

On completely dry CeboFix R, Apply the first coat of CeboStrong and carefully smooth the surface. A d After drying the first coat to pply CeboStrong with trowel steel and achieve the effect desired aesthetic working on crossed and irregular strokes. Before complete drying, go over the surface in order to lightly flatten the parts in relief. If the product is too dry, moisten with nebulized water . When CeboStrong is completely dry , apply two coats of CeboIron Cromo with a 2½ or 4 inch CeboSi brush, proceeding with crossed strokes and blending with a synthetic sponge . When the first coat is completely dry, apply the second coat in the same way.