Surface preparation
All gypsum, lime and civil substrates are suitable. Check that the substrates are perfectly clean, dry and uniform in appearance and absorption.

CeboFix R: pigmented and breathable primer, contains quartz powder. Can be applied with a short hair roller in one or two coats till the complete cover of the surface. Once CeboFix R has dried, in the case of particularly rustic or irregular substrates, apply CeboFondo.

CeboArt Pozzolano

Decorative coating, for interiors and exteriors, breathable, based on lime putty, natural. The product allows to create different effects and finishes such as Lamato, Lamato Lucente, Intonachino Fine or Travertino, all united by an opaque appearance and by the characteristic dots of river sand.

Lamato effect application cycle: on the prepared substrate, apply a first coat of CeboArt Pozzolano with a stainless steel trowel with crossed and irregular trowels. Once dry, apply the second coat by compacting the product more or less according to the desired final effect (more or less closed). If the surface is too dry, wet the trowel with water.

Lamato Lucente effect application cycle: on the prepared substrate, apply the first coat of CeboArt Pozzolano as described above. Once dry, mix CeboLamè with CeboArt Pozzolano and proceed with the application of the second coat.

Application cycle Intonachino Fine effect: on the prepared substrate, apply a first coat of CeboArt Pozzolano with a stainless steel trowel with crossed and irregular strokes. Once dry, apply a second coat with a stainless steel trowel and, once the product is still wet, go over the surface with circular movements using the fine sponge float (A/58 or A/59) measuring 24×12 or 12×12 cm. If the substrate is too dry, wet the float with water.

Travertine effect application cycle: apply CeboArt Pozzolano with a stainless steel trowel in a homogeneous thickness of 1-2 mm. With the product still wet, work the surface with the special CeboSign tool (A / 35) of 12×12 cm to recreate the travertine’s characteristic veins. To obtain a more natural effect, proceed in the processing in an irregular way, avoiding the repetition of the design. Before the complete drying of the product, smooth the surface with the trowel, slightly pressing the raised parts. If the product is too dry, wet the trowel with water.

CeboArt CalceFine

Decorative coating, for interiors and exteriors, breathable, based on lime putty, natural. The product allows you to create elegant finishes with a perfectly opaque appearance such as Levigato or Levigato Lucente.

Levigato effect application cycle: on the prepared and completely dry substrate, apply a first coat of CalceFine with a stainless steel trowel with crossed and irregular trowels. After drying, apply the second coat by compacting the product.

Application cycle for Levigato Lucente effect: on the prepared and completely dry substrate, apply the first coat of CalceFine as described above. Once dry, mix CeboLamè with CeboArt CalceFine and proceed with the application of the second coat by compacting the product.

CeboSil: breathable and water-repellent acrylic-siloxane protective finish with a matt and velvety touch. Dilute the product with water in a 1: 1 ratio. CeboSil is applied in one hand with a synthetic sponge, proceeding from the bottom upwards to avoid dripping.

CeboMika: special additive in flakes based on natural mica which added to CeboArt Pozzolano or CeboArt CalceFine creates elegant light points in the finish. CeboMika is available in Silver and Gold shades in packs of 25 ml and 100 ml to be used in the following dosages:

1 x 100 ml in 20 kg tin

1 x 25 ml in 5 kg tin.