Trattamento della superficie:
Su superfici lisce e pulite, preventivamente livellate dove previsto, applicare CeboFix M, fissativo primer trasparente a base di microemulsione acrilica. CeboFix M è consigliato in caso di pareti nuove o recentemente riparate, supporti molto assorbenti o sfarinanti e deve essere applicato a pennello, diluito 1:1 con acqua.

Application cycle BARKODE effect
Apply CeboIdea by plastic trowel (A21), in a uniform 2-3 mm thickness.Immediately decorate the product with the specific tool CeboBars available in 4” size (A/16) and in 8” size (A/17) to obtain vertical or horizontal stripes. When the product is still wet, slightly smoothen the decorations with the trowel Caress (A/38). It is advisable to carry out the application and following decoration procedure in areas of 1 meter width at a time. Wait until CeboIdea is completely dry (6-8 hours) and use sandpaper on the surface to remove all’imperfections. Apply CeboStyle Antico Antico in one or two coats with the appropriate CeboSi brush 4” size (A/27) following the direction of the pattern previously created. The first coat must be dry before the application of the second coat.
After about 6-8 hours, when CeboStyle Antico is completely dry, apply one coat of CeboIron by stainless steel trowel, always respecting the direction of the previously designed decoration and taking care to remove the excess material with the same trowel so as to enhance the areas in relief.

CeboIdea:
Water based acrylic paint that due to its particular formulation can be applied as a decorative coating to create special effects slightly in relief.

CeboStyle Antico:
Water based, washable, full hiding paint with a metallic finish.

CeboIron Grigio & Nero:
Water based acrylic semi-hiding finish, with micaceous and pearly pigments.