Finiture Preziose & Effects

Cebostyle Active Antico Platinum + Ceboskil

CeboStyle Active Antico Platinum is a water-based acrylic finish for interior use, with a slightly metallic appearance, high washability, mechanical resistance and low dirt pick-up; it can be used on all types of substrates, suitably prepared. The finish is ready to use and can be applied to walls prepared with FondoPlus or CeboLife Active and other surfaces such as wood, metal, plastic or ceramic prepared with CeboFix Extra. Apply CeboStyle Active Antico Platinum with a 2½- or 4-inch CeboSi brush, proceeding in crisscross strokes and avoiding sharp brush strokes. When the first coat is dry, apply the second coat in the same way.

Cebostyle Active Antico Platinum + Ceboskil

Finiture Preziose & Effects

Preparing the walls
Check that the walls are even, perfectly clean and dry. In the presence of recent levelling, chalking or absorbent substrates, carefully clean the substrate and apply CeboFix M transparent acrylic fixative, by brush, diluted 1:1 in volume with water.

Preparation of various substrates
After adequate preparation of various substrates such as metal, plastic, wood or ceramics, apply CeboFix Extra pigmented anchoring primer for interior use in one coat with a roller or brush, diluted 5-10% by volume with water.

CeboSkil
On surfaces subject to frequent cleaning, protection with hardened CeboSkil is recommended. CeboSkil is a transparent, water-based, two-component, polyacrylic resin protective topcoat for interior and exterior use, available in the following versions Glossy – Satin – Matt. CeboSkil catalyzed has excellent washability and mechanical resistance, and is certified for use in environments where food is present (HACCP).

Application of CeboSkil
CeboSkil catalysed with CeboCat and diluted with water, is applied in two coats on perfectly dry (at least 24 h) CeboStyle Active Antico Platinum with a short-hair roller properly drained using a roller pan. Wait at least two hours between the first and second coat. CeboSkil catalysed with CeboCat must be used within 3 hours after mixing.

Please note: In order not to change the metallic appearance of CeboStyle Active Antico Platinum, we recommend applying CeboSkil in the Gloss or Satin versions.

Note: 7 days after application of CeboSkil, surfaces are perfectly washable with water and neutral detergents.