Surface treatment:
All plaster, lime, and civil funds are suitable. After cleaning and any preparation of the support, apply CeboFix R white or colored roller in the same color of the finish, in one or two coats. To obtain a smoother and more homogeneous effect and enhance the aesthetic peculiarities of the product, shave the surface with CeboSfera in the desired shade.

Application of CeboSfera after fund preparation

Cascata Effect: apply CeboSfera with steel trowel and proceed to spatulate vertically in an alternating and opposite direction: before the complete drying, go over the surface with the drained trowel following the direction of the design to eliminate any excess product.

Cometa effect: apply CeboSfera with diagonal spatulates using the toothed side of the Shark spatula, in a homogeneous thickness, taking care to smooth it afterwards with the Shark spatula but on the smooth side. When the product is still wet, dab the surface in the same way with the CeboSign tool, creating non continuous and porous veins alternating with other smoother and more compact ones; go through the area just worked with the Caress spatula to eliminate product excesses.

IronStar Effect: apply CeboSfera with diagonal spatulas using the toothed side of the Shark Trowel, in a homogeneous thickness, taking care to smooth it afterwards with the Shark Trowel but on the smooth side. When the product is still wet, dab the surface in the same way with the CeboSign tool, creating non continuous and porous veins alternating with other smoother and more compact ones; go through the area just worked with the Caress spatula to eliminate product excesses. On the completely dry surface, apply with synthetic sponge a coat of CeboIron Grey, semi-opaque water finish with micaceous and pearlescent pigments, colored in the same shade of CeboSfera: Spread CeboIron Grey avoiding product accumulation following the sense of the design.

Cosmo Effect: apply a coat of CeboSfera with the steel spreader and proceed with cross spatulates: before the complete drying, go over the surface with the drain spreader, to regularize the design and eliminate any excess product.

Niagara effect: apply CeboSfera with the steel trowel and proceed with vertical spatulates taking care to alternate the various colors to create the desired design. Allow the amount of material needed for the drawing to be smoothed before complete drying. It is advisable to apply the first coat to shave CeboSfera in the lightest color, among those chosen, always proceeding vertically.

Onda Effect: apply CeboSfera, using the toothed side of the Shark Frattone, in a homogeneous thickness, taking care to smooth it afterwards always with the Shark Frattone but from the smooth side and proceed as follows: line the surface with the “Onda 4” Fractal, in the chosen direction (horizontal or vertical) and still wet product, using the Caress spatula, gently brush the surface following the direction of the design. It is advisable to proceed with the drafting and subsequent processing in bands of about 1 meter.

Zeffiro Effect: apply CeboSfera horizontally or vertically, using the toothed side of the Shark Frattone, in a homogeneous thickness, taking care to smooth it afterwards with the Shark Frattone but on the smooth side. With the CeboSign tool, line the surface in the chosen direction (horizontal or vertical) and when the product is still wet, using the Caress spatula, gently brush the surface following the direction of the design. It is advisable to proceed with the drafting and subsequent processing in bands of about 1 meter.