- Finiture Preziose & Effects
Cebolife Active + Cebostile Active Antico
CeboLife Active is a styrene acrylic resin-based wall finish, for interior use, with high washability and coverage, and a full, matt appearance. It can be applied by roller after diluting to 15-20% by volume with water, or by brush or spray, diluted to a maximum of 30% by volume with water, depending on the tool chosen.
CeboStyle Active Antico Silver is a water-based acrylic finish for interiors, with a metallic appearance, high washability, mechanical resistance and reduced dirt pick-up; it can be used on all types of substrate, suitably prepared and is available in the Silver and Silver XL bases. The topcoat is ready to use and can be applied to surfaces prepared with FondoPlus or CeboLife Active and other surfaces such as wood, metal, plastic or ceramic prepared with CeboFix Extra. Apply CeboStyle Active Antico Silver with a 2½ and 4 inch CeboSi brush, proceeding in crisscross strokes and avoiding sharp brush strokes. When the first coat is dry, apply the second coat in the same way.
Cebolife Active + Cebostile Active Antico
- Finiture Preziose & Effects
Preparing the walls
Check that the walls are even, perfectly clean and dry. In the presence of recent levelling, chalking or absorbent substrates, carefully clean the substrate and apply CeboFix M transparent acrylic fixative, by brush, diluted 1:1 in volume with water.
Preparation of various substrates
After adequate preparation of various substrates such as metal, plastic, wood or ceramic, apply CeboFix Extra pigmented primer anchor for interior use, in one coat with a roller or brush, diluted 5-10% by volume with water.
CeboSkil
On surfaces subject to frequent cleaning, protection with hardened CeboSkil is recommended. CeboSkil is a transparent, water-based, two-component, polyacrylic resin protective topcoat for interior and exterior use, available in the following versions Glossy – Satin – Matt. CeboSkil catalyzed has excellent washability and mechanical resistance, and is certified for use in environments where food is present (HACCP).
Application of CeboSkil
CeboSkil catalysed with CeboCat and diluted with water, is applied in two coats on perfectly dry (at least 24 h) CeboLife and/or CeboStyle Antico Silver, with a short-hair roller properly drained through the use of a tray. Wait at least two hours between the first and second coat. CeboSkil catalysed with CeboCat must be used within 3 hours after mixing.
Note: In order not to change the metallic appearance of CeboStyle Antico Silver, we recommend applying CeboSkil in the Gloss or
Satin.
Note: 7 days after application of CeboSkil, surfaces are perfectly washable with water and neutral detergents.
You May Also Be Interested
Send us a message
"*" indicates required fields